Cinema Projector Led Status Indicators; Work With The Lamp; Turn The Lamp On; Turn The Lamp Off - Christie CP4230 User Manual

Section 5: Cinema Projector Operation
Power ON
Power OFF
Lamp ON
Lamp OFF
5.4

Cinema projector LED Status Indicators

Red, yellow, and green LEDs on the top and rear corners of the cinema projector indicate the status of the
cinema projector. The LEDs can be solidly lit, or they can flash frequently or intermittently. This table lists the
LED state and its associated meaning.
Table 5.2 cinema projector Status LED Legend
LED
Solid Green
Green Blip
Solid Yellow
Yellow Blip/
Green Blip
Flashing Red
Solid Red
5.5

Work with the Lamp

This section provides information and procedures for optimizing lamp performance. Optimizing lamp
performance can ensure you receive the brightest, most uniform image possible for the life of the lamp.

5.5.1 Turn the Lamp On

1. Turn on the circuit breaker for the cinema projector.
2. On the Touch Pad Controller (TPC) press and hold the green power icon for two seconds.
3. On the TPC, press and hold the lamp on icon for 2 seconds.
5.6

Turn the Lamp Off

1. On the Touch Pad Controller (TPC), press and hold the lamp off icon for two seconds.
2. On the TPC, press and hold the power off icon for two seconds.
5-2
To full power ON
(boot delay)
No action
To power ON and
lamp ON (boot delay)
No action
State
Lamp ON
Power ON
Standby mode
Cool down mode
New critical alarm or warning
Existing critical alarm or warning
No action No action
Power OFF Lamp OFF
immediately (immediately), enters
cool down mode
To lamp ON No action
(immediately)
No action Lamp OFF
(immediately)
Description
Power is ON, Lamp is ON.
Power is ON, Lamp is OFF. The lamp can be struck when in
this mode.
Power is OFF, Lamp is OFF. Power saving mode.
Transitioning to Standby mode.
Power is ON, Lamp is OFF.
The lamp can be struck when in this mode.
New critical alarm or warning has NOT been acknowledged
by operator.
Critical alarm or warning exists, but has been acknowledged
by operator.
Cancels cool down,
goes into full
power
No action
Cancels cool down,
goes to Lamp ON
(immediately)
No action
CP4230 User Manual
020-100621-03 Rev. 1 (05-2014)