Christie CP4230 User Manual page 176

Appendix B: Serial API
L/R Display Sequence (TFD)
Set L/R Display Sequence for 3D control. This selects which signal is considered first in the source signal, the left
or the right.
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select L/R display sequence for the current channel
EXAMPLES:
(TFD?L) List all entries on Input Frame Dominance control
(TFD+C101 1) Set Input Frame Dominance to 1 on channel 101
(TFD+C101?) Get Input Frame Dominance on channel 101
3D Frame Rate Multiple (TFR)
Setup frame rate multiple for 3D control
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select 3D frame rate for the current channel.
EXAMPLES:
(TFR?L) List all entries on the frame rate multiple factor
(TFR+C101 3) Set frame rate multiple to "4:2" on channel 101
(TFR+C101?) Get frame rate multiple on channel 101
Get Certificates (TIG)
Gets the LD or ICP certificate.
SUBCODE DESCRIPTION OF USE
ENGC
Retrieve LD Certificate
ICPC
Retrieve ICP Certificate
EXAMPLES:
(TIG+ENGC?) Gets the LD certificate
(TIG+ICPC?) Gets the ICP certificate
3D Input Reference (TIR)
Setup the Input Reference for 3D control.
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101-164.
NONE
Select input reference for the current channel.
EXAMPLES:
(TDK+C101 "Use GPI (polarity=true)") set Input Reference to 'Use GPI (polarity=true)' on channel 101
(TDK+C101?) get Input Reference for channel 101
B-28 CP4230 User Manual
020-100621-03 Rev. 1 (05-2014)