Install The Optional Anamorphic Lens - Christie CP4230 User Manual

NOTE: Make sure the cover is between the mounting tabs.
8. Connect the harness wires.
9. Move the lens clamp to the down position to lock the lens assembly in place.
10. Calibrate the lens. See
11. Install the shroud.

2.11 Install the Optional Anamorphic Lens

1. Optimize your primary lens first for best optical alignment, offset and boresight
2. Install the auxiliary lens mount using the instructions included with the kit.
3. Loosen the holding clamp on the auxiliary lens mount. Adjust the rotation of the anamorphic lens so the
image remains perfectly square with anamorphic in and out.
CP4230 User Manual
020-100621-03 Rev. 1 (05-2014)
Section 4.3 Basic Image Alignment
Section 2: Installation and Setup
for details.
2-13