Powering The Library On And Off; Power The Library On; Power The Library Off - Oracle StorageTek SL150 User Manual

Powering the Library On and Off

To abort, press the Cancel button when the confirmation dialog appears.
4.
Powering the Library On and Off
If a maintenance procedure requires that you power the library off and/or restart, use
the procedures below:

Power the Library On

■

Power the Library Off

■
Restart the Library
■
For an explanation of library behavior following power interruptions, see
the Library Following a Power Outage"
Power the Library On
When the SL150 library is powered off, the browser-based user interface is not
running, so you cannot power the system on remotely. You must have physical access
to the library.
To power the library on, press the power switch on the upper left quadrant of the front
panel of the base module.
The library then boots and performs an audit of the contents. See Auditing, below, for
details.
Power the Library Off
If you have physical access to the library, press the power switch on the upper left
1.
quadrant of the front panel of the base module.
If you are working remotely, log in to the browser-based user interface under the
2.
Operator, Service, or Administrator role, click on the power-button icon in the top
left corner of the interface.
Select Power Down Library from the context menu (remote interface) or popup
3.
dialog (local operator panel interface).
A Power Down Library confirmation dialog appears.
If you plan to move the library to a new location, need to add or replace expansion
4.
modules, or need to remove or replace the robot/library controller assembly, go to
"Securing the Robot and Controller Assembly"
Lock the
7-2 StorageTek SL150 Modular Tape Library User's Guide
Robot.
on page 7-3.
on page 7-8, Park the
"Restarting
Robot, and