Memory Problems; Scsi Problems - Compaq AP200 Maintenance And Service Manual

Memory Problems

This section identifies some quick checks for memory-related problems.
Problem
Out of Memory error.
Memory count during POST is wrong.
Insufficient memory error during operation.

SCSI Problems

Some common causes and solutions for SCSI device problems are listed in the following table.
Problem
System will not boot
from a SCSI drive.
Table 4-9
Memory Problems
Possible Solution
1. Run Performance Monitor. Click Start, Programs,
2. The workstation has run out of memory to run the
The DIMMs may not be installed correctly. Check that
the DIMMs have been installed correctly in the DIMM
sockets then run the Computer Setup utility.
The system has run out of memory for the application.
Check the memory requirements for the application or
install additional memory.
Table 4-10
SCSI Problems
Cause
The SCSI drive is not configured
correctly.
Compaq Professional Workstation AP200 Maintenance and Service Guide
Administrator Tools.
application. Check the application documentation to
determine the memory requirements.
Solution
Be sure that drive cabling and jumpers are
set correctly. To boot a SCSI drive, the drive
ID number must be set to 0.
4-15