Compaq AP200 Maintenance And Service Manual page 47

3-30 Removal and Replacement Procedures
5. Slide the power supply toward the front of the computer, then lift up and remove it from
the chassis
Figure 3-31. Removing the power supply
To replace the power supply, reverse the above procedure.
2
.
1
2
WARNING: This equipment is designed for connection to a grounded (earthed)
outlet. The grounding type plug is an important safety feature.
To reduce the risk of electrical shock, damage to the equipment, or loss of the
data, do not disable this feature.
WARNING: This procedure should be performed only by qualified personnel. Do
not reconnect power to the computer until the computer cover is replaced.
Connecting the power before replacing the computer cover can result in personal
injury or equipment damage.