Compaq AP200 Maintenance And Service Manual page 55

3-38 Removal and Replacement Procedures
8. Remove the subpanel and rotate the bezel blanks 90 degrees.
Minitower Configuration
Figure 3-39. Rotating the bezel blanks when converting a minitower to a desktop
9. Replace the subpanel, front bezel, and the access panel.
10. Reassemble the computer.
CAUTION: Hold the subpanel straight when you pull it away from the front bezel.
Pulling the subpanel away at an angle could damage the pins that align it within
the front bezel.
Desktop Configuration