Tools And Utilities - Oce Arizona 550 GT User Manual

will not work without it. If you attach a new bag of ink that is not compatible, or for any
other reason an ink flush is required, you will see the Ink Status screen with a mesaage
that directs you to the Ink Flush Procedure.
Note:
Contact your local service representative for information about the ink flush kit that is
required for the flush procedure. Only inks certified by Océ can be used with your
printer.
Spit Catcher Alignment Procedure
A Spit Catcher is necessary for all printers with the white ink option installed or for any
printer that uses the new Océ ICJ256 inks. The Spit Catcher consists of a slotted cover
for the Maintenance Station drawer and a foam pad that is held in place under the
drawer. Both the white ink and all of the IJC256 inks need to "spit" periodically to help
keep the printhead nozzles clear of debris. The Alignment Procedure is needed when the
Spit Catcher is first installed or if for some reason the park position of the carriage changes.
The purpose of the alignment is to have the carriage parked directly over the slots in the
spit catcher so that the ink that is spit falls though the slots and is soaked up by the foam
pad below. If you see a buildup of ink on the surface of the spit catcher it may mean you
need to follow the alignment procedure.
Note:
The foam pad must be changed if it becomes too saturated with ink. It is a commercial
item so see your local representative for replacements.
System Logs
The System Logs are raw data log files for service diagnostics and troubleshooting purposes.
They are meant for service technicians only. Generate system logs only when requested
by an Océ service technician and follow the instructions they provide for retrieval of the
files.
Note:
When System Logs are generated, any previously saved log files are deleted. Therefore,
do not generate a second batch if you have just recently generated log files (unless re-
quested to do so by a service technician).
Chapter 4 - How to Navigate the User Interface
Tools and Utilities Module
69