Oce Arizona 550 GT User Manual page 126

How to Print on Roll Media
Attention:
The red Emergency stop buttons do NOT stop the media transport when you print on
roll media (they only stop gantry and carriage movement). If you encounter a situation
where the roll media runs continuously without operator input, the only recourse is to
shut off the printer's AC power switch.
Prepare a Roll Media Print Job
Click on the Roll icon in the menu bar of the Job Control module to disable the RMO
1.
print queue (this allows you to check media parameters before the job actually prints in
case the job was not given a Hold status when it was generated in Onyx ProductionHouse).
[81] Roll Icon
In the Print Job Control module, transfer a print job from Onyx ProductionHouse.
2.
Click on the Roll Manager icon to enter the Roll Media Manager dialog window.
3.
[82] Roll media manager
Enter the Media width for the roll media that you have loaded.
4.
Check that the rest of the media parameters displayed match the particular media you
5.
loaded.
You can create a new media or edit an existing one by changing the parameter values and
6.
then saving them under a new media name. When you create a new media it takes the
126 Chapter 6 - How to Operate the Roll Media Option