Oce Arizona 550 GT User Manual page 247

Disconnect both UV lamp cables by first loosening the screw lock and then pulling the
5.
lock away from the connectors.
[185] Remove connectors
Ease the bulb out of the retainer clips, one end at a time and then remove it from the
6.
housing.
[186] Remove UV lamp bulb
Place the used bulb in a container for recycling.
7.
Wipe the new bulb with the supplied alcohol wipe.
8.
Ensure that the UV shutters are still open (rotate the motor dampener if they are not).
9.
Pick up the new bulb by its ceramic ends.
10.
Insert the bulb into the retainer clips one at a time, ensuring that the bulb is centered
11.
and seated firmly into the clips at both ends.
Reconnect the bulb connectors and tighten the screw locks.
12.
Rotate the two UV light shields clockwise back to the closed position so that they are
13.
parallel to the end plate.
How to Change a UV Lamp Bulb
Chapter 11 - Printer Maintenance 247