Oce Arizona 550 GT User Manual page 233

Coolant
Attention:
When the coolant level is below the center of the site-tube the printer software will display
a warning and shut down any print jobs. Make sure that you keep the coolant level near
the top at all times to avoid stopping in the middle of a print job.
Illustration
[173] Fill the Coolant Reservoir
Fill the Coolant Reservoir
Remove the cap from the coolant reservoir located next to the green beacon light on top
1.
of the carriage.
Open the container of coolant fluid.
2.
Insert the syringe into the fluid and draw back the plunger until the syringe is almost full.
3.
Fill the Coolant Reservoir
Chapter 11 - Printer Maintenance 233