Oce Arizona 550 GT User Manual page 131

banding occurs can be performed, though it is usually not necessary). This is the low end
of your MACF range.
Note:
With some media, the more dense (darker) colors may still show thin lines when the
correction factor is close to being correct (due to edge of swath banding); in this case it
may be wise to use the lighter colors to calibrate the correction factor.
Apply the Optimal MACF to the Current Media
The above procedure provides two values where neither white gaps nor dark lines are
present. The median value of this range is entered in the MACF field in the Roll Media
Manager. The given media profile (media thickness, tension, MACF, and lamp power
settings) can then be saved in the Roll Media Manager, and used whenever that type of
media is present.
Open the Roll Media Manager.
1.
Enter the media value in the MACF field.
2.
Click on "Create new media from current settings".
3.
Note:
You can either save the media with the same name or create a new name for the media.
Result
When you use the same media in the future, it will always have this media advance cor-
rection factor associated with it.
How to Determine Media Advance Correction
Chapter 6 - How to Operate the Roll Media Option 131