Oce Arizona 550 GT User Manual page 184

How to Create a Media for White Ink Print Jobs
Note:
The printer only has one available white ink spot channel, so do not insert a second spot
or the Rip will treat files using this configuration as separations.
Click > OK.
8.
At this point, the media you have created can be used in Preflight to view and Rip files
for white ink output. You will be able to see where Spot white has been used in prepared
files and work with Preflight's Spot Layer Tool. However, media at this stage is without
those components of a media model that determine the optimal ink usage, such as ink
restrictions and linearizations. Not utilizing these components will result in inaccurate
color output and without an ICC profile your usable file color space is limited to CMYK.
As well, not restricting your ink levels correctly may result in an increase in ink droplet
misting issues.
Note:
Most of the steps for creating a media with a white spot are similar to the regular workflow.
Please do not attempt these steps unless you have experience creating media profiles. The
profiling steps and color theory are not explained in detail and are not covered in this
document.
For the best quality output results, we recommend that you continue building your media
9.
model as described below.
How to Configure Layers and Print Order
If order to make use of the multi-layered Quality-Layered print mode in your printer,
you must configure your layers and also set what inks will print on each of the layers.
184 Chapter 8 - How to Work With White Ink