Oce Arizona 550 GT User Manual page 244

How to Change a UV Lamp Bulb
Caution:
These UV lamp bulbs contain mercury, and if they are broken the vapor is toxic if inhaled.
The lamp bulbs must be disposed of according to local environmental regulations.
How to Remove the Lamp Housing
Remove the safety fence by lifting it straight up and then away from the carriage.
1.
Disconnect the UV lamp housing power cable connector by pressing in the two blue tabs
2.
on either side and pull it out.
[180] Disconnect power cable
Remove the foam filter from the top of the housing by lifting the exposed edge as shown
3.
below. It is flexible and will bend as you remove it.
[181] Remove Lamp Filter
244 Chapter 11 - Printer Maintenance