Oce Arizona 550 GT User Manual page 153

How to Access the Spot Layer Tool
Open a print job in Preflight.
1.
Select the Color Corrections tab.
2.
Click on Tools and select Spot Layer Tool. This will open the feature set.
3.
Note:
If the Enable checkbox won't activate, the media you used to open the job has not been
configured with the Quality-Layered print mode. Create or Edit your media to support
spot ink in Media Manager before you open the job in Preflight (or download a white
ink media model from the web site).
[97] Spot Layer Tool
Check Enable Spot Layer Generation to activate the tool.
4.
Use the explanations of the Spot Layer Tool options at the beginning of this section to
5.
help you use the tool.
How to Create Spot Data with the Spot Layer Tool
Chapter 8 - How to Work With White Ink 153