Oce Arizona 550 GT User Manual page 181

Note:
The term "media" can be confusing as it really has two meanings in the context of your
Onyx workflow. In general use it refers to a physical material that you can print on.
ProductionHouse uses the term media to refer to the definition of how a particular
material is used and included within a media model that you define and then use when
you open a print job.
Before you begin
Before you create a new media you must set up your printer to enable white ink configu-
rations in Onyx Media Manager.
In the RIP-Queue, highlight your printer and click > Media Manager.
1.
Click > Configure Devices > Configure Printer Capabilities and enable the white ink
2.
configurations (CMYKW) from the ink configuration menu.
[146] Configure Printer
Your printer is now enabled with an ink configuration that supports white ink. You only
have to set this up one time unless you add a new printer to ProductionHouse.
Note:
The next section will show you how to create a media model that is configured for white
ink printing.
Return to the Media Manager Home page.
3.
How to Create a Media for White Ink Print Jobs
Chapter 8 - How to Work With White Ink 181