Oce Arizona 550 GT User Manual page 173

How to Use Media Models
[130] Day/Night Print Reflection
When you process a print job in ProductionHouse with this media model as provided,
the job information displayed in the printer's Print Job Control module will appear as
follows:
[131] Day/Night Parameters
Select the Layers button in the Job Control module to activate a graphical representation
of the Print Layers that allows you to verify the layer order.
[132] Day/Night Layers
Two White Ink Layers on Black Substrate
Download file: Oce_Arizona_350_GT_WhiteInk_BlackSubstrate.OML
This media model was built using a media with a black print surface. In this instance,
black Polystyrene was used. Due to the darkness of the media it is possible that the media
color will show through. Therefore this media model makes use of two white ink layers
to achieve opaque white coverage, followed by a CMYK image layer, and the result is a
3-layer media model. In this media model, the white ink layers are designated as Spot
layers, so spot data must be either created in an image-editing program prior to opening
Chapter 8 - How to Work With White Ink 173