Oce Arizona 550 GT User Manual page 177

How to Use Media Models
[140] Define Layers
When you process a print job in ProductionHouse with this media model as provided,
the job information displayed in the Arizona 350 GT Print Job Control module will appear
as follows:
[141] Parameters
Select the Layers button in the Job Control module to activate a graphical representation
of the Print Layers that allows you to verify the layer order.
[142] Layers
White Flood Fill in Production Mode
Download file: Oce_Arizona_350_GT_WhiteInk_ProductionFlood.OML
This is the only media within the provided White Ink Workflow Media Model set that
is not in Quality-Layered mode. This media is to be used as either a pre-print or post-
print flood fill when the speed of application is foremost and fully opaque white coverage
is not necessary. This mode is not intended for 4 color CMYK plus white print jobs; it
is simply a means to lay down white ink. First you must create a file that is sized at the
final output dimensions required. Then fill it with either Spot 1 data, or leave it as a single
Chapter 8 - How to Work With White Ink 177