Oce Arizona 550 GT User Manual page 85

How to Set Up a Print Job
Note:
When the ink is at a low room temperature it may take up to 20 minutes for it to warm
up to operating temperature. The printer will not print until the ink warms up. Also,
when the printer is idle it will maintain the ink at operating temperature for two hours.
Note: The image is printed towards the print origin instead of away from it (i.e., the
last data line to be printed is the line at the print origin). The reason the image is printed
in this direction is to allow the gantry to lead the image in the print direction so it does
not block the image when it starts printing. Also it reduces the time it takes for the gantry
to start the print.
Chapter 5 - How to Operate the Océ Arizona 550 GT 85