Chapter 4 - Oce Arizona 550 GT User Manual

Print Job Control Module
Hold job
Cancel job
Delete job
Flatbed icon
54 Chapter 4 - How to Navigate the User Interface
The command can do following actions depending on context:
Puts an active job on hold.
Waits until the printer finishes a currently printing copy and
puts the job on hold.
The command can do following actions depending on context:
Deactivates a selected active job by moving it to the inactive
list. Note that Special Prints will not move to the inactive list.
Cancels a currently printing job and moves it to the inactive
list. Note that the first click cancels the print, but the carriage
will continue to apply curing passes so that the ink cures prop-
erly. A second click terminates the print job immediately and
gives a warning about uncured ink.
Deletes a job from the printer. However, you cannot delete a job
that is currently printing.
Process flatbed jobs toggle command - Allows printer to process
flatbed jobs. This must be selected to enable flatbed printing when
the printer is booted or after re-setting the printer due to an error.