Oce Arizona 550 GT User Manual page 109

Roll Media Option Specifications
Leader & End of Roll Waste
Leader Waste: 560mm (22 inches)
Leader waste is the amount of media that cannot be printed between the roll media
platen and the take-up media roll. This waste is produced every time media is loaded,
taped to the take-up core and initialized in preparation for the first print. Trailer waste
is the media that cannot be printed at the end of the supply media roll. This will vary
slightly depending on the attachment method that was used to secure the media to the
media core.
End of Roll Waste (minimum possible): 920mm (36 inches)
End of roll waste is the media that cannot be printed at the end of the supply media roll.
This will vary slightly depending on the attachment method that was used to secure the
media to the media core.
Chapter 6 - How to Operate the Roll Media Option 109