Chapter 4 - Oce Arizona 550 GT User Manual

Printer Interface Software
Operator Interface Module Tabs
#
[44] Interface Tabs
Interface Modules
Component
Print Job Control
(Print tab)
Printer Counters
(Counters Tab)
Printer Settings
(Settings tab)
Service and Diag-
nostics
Tools and Utilities
(Tools and Utilities
tab)
Software Upgrade
(Upgrade tab)
50 Chapter 4 - How to Navigate the User Interface
#
Function
Provides management of all aspects of working with print jobs.
It also controls some features of the printer and provides access
to Roll Media print controls (if that option is installed).
Provides information about the amount of ink consumed, the
amount of media printed and the number of print jobs started.
Also provides counters for the UV lamp bulbs use.
Displays information about, and also allows you to change
various aspects of the printer: Date and Time, Network Con-
nections, User Interface, Printer Settings, and Roll Media Set-
tings (if that option is installed).
This area is reserved for use by trained field service technicians
only.
Provides access to the Shutdown, Job Manager, Special prints,
Ink Flush Procedure, Spit Catcher Alignment, and System Log
files.
Shutdown properly closes the printer software in preparation
for powering down the printer.
Job Manager allows you to perform a bulkcleanup of print jobs
(e.g., select all jobs then delete them).
Special Prints provides various special adjustment prints, table
ruler images, a quality control Reference print image, and the
Nozzle Check print.
Ink Flush clears the selected color ink line.
Spit Catcher Alignment is used to align the carriage over the
spit catcher to support white ink or IJC256 ink.
System Logs allows the operator to generate log files for service
diagnostics and troubleshooting.
Allows you to update the printer to the latest version of the
printer software and firmware.