Chapter 4 - Oce Arizona 550 GT User Manual

All incoming jobs go directly into the job list or job queue.
Selecting a job in the list highlights the job and updates the job information area.
The job information area contains offsets, print quality mode information, number of
copies and overprints, and the name of the ProductionHouse profile used and the image
to be printed is also displayed.
Jobs can be moved up or down in the list and can either be printed, held or canceled.
2) Printer Messages (or Log) Panel
The printer status panel is in the top right corner of the display. It shows the last four
lines of the printer log that contains printer errors, warnings, and information messages.
To see more of the log, click on the panel to bring up a new window that allows you to
scroll through the log.
3) Pause and Ink Status
Pause/Resume print button. This button can be used to pause or resume a print job.
It is active only while a job is printing.
Note:
Use of the Pause/Resume button may cause artifacts in a print because of the uneven
curing of the ink if the job is paused. Do not use this unless it is essential that the print
job is paused.
Ink System Status. Click the icon to open an ink system status dialog that displays ink-
related information. This includes for each color of ink: an expiry date, ink type code,
ink bag status, fill status (whether ink is being pumped into the reservoir), and whether
the reservoir is full. The dialog also shows the current printhead temperature, the meniscus
vacuum level, and the purge pressure.
4 & 5) Command Toolbar
The printer toolbar contains buttons that allow you to interact with the printer (listed in
the table below in the order they are displayed on the command toolbar). Note that some
of the buttons have a checked and unchecked state with a different appearance of the
icon image to reflect their state.
#
[46] Command Toolbar
Print job This command can do the following actions depending on context:
Activates a selected inactive job by moving it to the active list.
Un-holds a held job.
Un-holds an job that had an error currently.
Chapter 4 - How to Navigate the User Interface
Print Job Control Module
53