Oce Arizona 550 GT User Manual page 227

Clean the UV Lamp Filter
Wait for the lamp fans to stop to ensure the housing has cooled down.
1.
Remove the lamp filter by first lifting one corner, then bend it in the center by placing
2.
your finger under the filter and lift it away from the power connector and off the lamp
housing.
[171] Remove Lamp Filter
Move away from the printer and use a vacuum cleaner to remove any debris or dust.
3.
Replace the lamp filter by inserting one long edge into the channel on top of the lamp
4.
housing, and then squeeze the filter so that the middle bulges and allow the other edge
to slide into the other channel.
Repeat steps 2 to 4 for the filter in the other UV lamp assembly.
5.
How to Clean the UV Lamp Filter
Chapter 11 - Printer Maintenance 227