Oce Arizona 550 GT User Manual page 213

Caution:
The underside of the UV lamps may be hot, avoid touching them.
Illustration
[162] Ink Removal Technique
How to Clean the Carriage Underside
Slide the maintenance station cover plate out from under the carriage to reveal the
1.
maintenance station.
Press switch 2 to raise the carriage to its maximum height.
2.
Wrap a clean poly wipe cloth around your index finger.
3.
Attention:
In the next step, make sure that you do not touch the nozzles of the printheads. If you
happen to touch one with the cloth, you must perform a printhead maintenance. Note
that contact with the printhead by any object other than the suction-head used for
maintenance can cause damage to the nozzles and result in poor image quality or possibly
require a printhead replacement.
Slide the cloth along the metal plate between the first two printheads to remove any ink
4.
that has accumulated.
Reposition the wipe so that a clean area is wrapped around your finger.
5.
Clean Carriage Underside
Chapter 11 - Printer Maintenance 213