Sartorius Factory Series FC06BBE-S Operating Instructions Manual page 83

Practical Example
Include company address as well as the lot number of the sample on printout.
Include this ID on every printout of the net value.
Settings (changes in the factory settings required for this example):
Setup: App: Extra function(F4): Identification codes: Printout: Each time the print key is pressed
Step
1. If necessary: turn on the scale
and enter the settings given above
2. Select Identification code input
3. Enter data for ID1:
(here: Sartorius)
4. Confirm input
5. Repeat steps 3 and 4 for
ID2: GOETTINGEN
ID3: WEENDER STRASSE
ID4: LOT 15
6. Place the first sample on the
scale (here: 210.53 g)
7. Print weight value
(If desired, perform further weighing
operations and print values)
8. When weighing is completed,
delete each ID code
Key (or instruction)
e/[ON/OFF]
soft key
ID
a ...
see also page 34
soft key
l
Place load on the scale
p/[PRINT]
soft key
ID
Press the soft key
Delete
4 times
Operating the Scale
Display/Output
83