Download  Print this page

Reprotest - Sartorius Factory Series FC06BBE-S Operating Instructions Manual

Industrial weighing tech.
Hide thumbs

Advertisement

Selecting the Calibration/
Adjustment Parameter
The setting
Selection mode
must be selected in the Setup menu
(factory setting).
After pressing the
isoTST
you can choose from among
the following settings by pressing the
soft key:
Select
In the selection mode: Perform external calibration followed by automatic adjustment with the factory-set weight
Configuration:
factory settings
Step
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1. Select Calibration
2. Select external calibration/adjust-
ment with factory-defined weight
(for scales of accuracy
class K, only "external
adjustment" is possible)
3. Start external calibration/
adjustment
4. Place the weight on the
scale (e.g., 2,000.00 g)
Minus sign –: Weight too low
Plus sign + Weight too high
no plus/minus sign: Weight o.k.
This is displayed after calibration,
for approx.10 seconds:
(on verified scales, the
difference between the
displayed weight and the
true weight (mass) is displayed)
5. Unload the scale
(ISO/GMP printout: see page 100)
40
– External calibration/adjustment
with the preset calibration weight:
Ext. cal./adj.;
factory-def. wt.
– External calibration/adjustment
soft key,
with a calibration weight deter-
mined by the user:
cal./adj.;user-
defined wt.
Key(s) (or instruction)
soft key
isoTST
soft key repeatedly
Select
soft key
Start
Place weight on scale
– Internal calibration/adjustment
Internal cal./
adjustment
– Reproducibility test

reproTEST

§ Start the desired routine:
Ext.
Press the
Display/Output
6
6
soft key again
isoTST

Advertisement

Table of Contents

   Also See for Sartorius Factory Series FC06BBE-S

   Related Manuals for Sartorius Factory Series FC06BBE-S

Comments to this Manuals

Symbols: 0
Latest comments: