Sartorius Factory Series FC06BBE-S Operating Instructions Manual page 34

ID for weight value (if desired):
§ Select the parameters "Line
format" and "For other app./
GLP" from the Setup menu:
Press M
§ Select mode:
Press the softkey
App
§ Set parameters:
See the chapter entitled
"Configuring the Scale"
§ Exit the Setup program:
Press M
Additional Functions
In addition to the functions:
– alphanumeric input
– taring (not during
alphanumeric input)
– printing
Practical Examples
Example W1: Simple weighing
Step
1. If necessary, tare the scale
( symbol: scale is tared,
S
– verified scales only)
2. Enter sample ID
3. Determine sample weight
(Example)
4. Print weight value
34
you can also access the following
functions from the weighing
application:
– calibration (not during alphanu-
meric input)
– setup
– turning off the scale
Calibration
§ Press
isoTST
> See the section on
"Calibration/Adjustment" for
further instructions.
Setup
§ Press M
> See the chapter entitled
"Configuring the Scale" for further
instructions.
Turning Off the Scale
§ Press e/[ON/OFF]
> The scale shuts off
> The display goes blank
Key (or instruction)
t
see Example W2
Place load on scale
p/[PRINT]
Display/Output
S-ID
N + 2231.56 g
ABC123