Sartorius Factory Series FC06BBE-S Operating Instructions Manual page 74

Practical Example
Weighing in Components
Settings (changes in the factory settings required for this example):
Setup: App: Application 3: Formulation: Automatic storage: On, first value at stability
Setup: App: Application 3: Formulation: Minimum load for automatic storage: 100 digits
Setup: App: Application 3: Formulation: Evaluation mode, MR function: Final evaluation, print
Step
1. Turn on the scale and configure
the settings as indicated above
2. Delete old formulation data,
if necessary
3. Tare the scale
4. Place the empty container
on the scale (here: 180.59 g)
5. Tare the scale
6. Weigh in the first component
(here: 42.88 g)
7. Store components in the
formulation memory
Scale is tared automatically
Components are printed out
automatically
74
Key (or instruction)
e/[ON/OFF]
c
t
Place load on the scale
t
Place components
in container
soft key
M+
Display/Output
6
isoTST
6
isoTST
6
isoTST
6
isoTST
6
isoTST