Sartorius Factory Series FC06BBE-S Operating Instructions Manual page 23

Setup – Application 1 –
Application
menu Application 2
(Control
functions)
Application 3
(Data records)
Application 3 through – see following pages
Basic Settings
see previous page
o Off
Checkweighing Activation of port lines
Type of checkweighing
input
Weight display mode
Automatic printout
of OK values
Time-controlled Function after time
functions interval
Automatic function
restart
Stability-dependent
storage mode
Tare after printout
o Off
Totalizing Automatic storage
Minimum load for
automatic storage
Source of data for auto storage – see next page
Formulation – see next page
Configuring the Scale
o Within check range
Always on
Stability and check range
At stability
Stability + check range -> on
o Target, min, max weight
Min, max weight
Target, min in %, max in %
o Absolute value
Difference from target
Yes
o No
Beep (acoustic signal)
Lock-in readout
o Automatic printout
Store value in App. 3 memory
o On
Off
o Without stability
After stability
After increased stability
Off
o On
o Off
On, first value at stability
On, last value at stability
On, value 70% –130% at stab.
None
o 10 digits
20 digits
50 digits
100 digits
200 digits
500 digits
1,000 digits
23