Preparation
§ Turn on the scale: Press e/[ON/OFF]
> Sartorius logo is displayed, self-test is performed
§ Select the Totalizing application program in the Setup menu: Press M
§ Select the Application menu:
§ Select
Application 3
§ Select
: Q or q soft key
Totalizing
§ Confirm
Totalizing
§ Select and confirm:
–
Automatic storage
or
Off
On, first value at stability
On, last value at stability
On, value bet. 70-130% at stabil.
–
Minimum load for automatic storage
or
None
or
10 digits
or
20 digits
or
50 digits
or
100 digits
or
200 digits
or
500 digits
1000 digits
–
Source of data for auto storage
or
Application 1
Application 2
–
Evaluated values
or
Net
or
Calculated
Net + calculated
–
Evaluation mode, MR function
Intermediate evaluation, print
Final evaluation, print
Intermediate eval., display+print
Final evaluation, display+print
–
M+/M- function, then tare
or
Off
On
–
Printout of individual components
or
No
Yes
see also the "Application Menu (Overview)" in the chapter entitled
"Configuring the Scale"
§ Save settings and exit the Setup menu: Press M
soft key
App
: Press the q soft key twice and then press O
: O soft key
:
or
or
:
:
:
or
or
:
Operating the Scale
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during alphanumeric
– printing,
you can also access the following
functions from this application:
– calibration (not during alpha-
– toggling to another application
– setup,
– turning off the scale.
:
Calibration/Adjustment
§ Press the
> See "Calibration/Adjustment"
Toggling to Another Application
§ Press D/[TOGGLE]
> See the section on the
Setup (setting parameters)
§ Press M
> See "Configuring the Scale"
or
Turning Off the Scale
§ Press e/[ON/OFF]
> The scale shuts off
:
> The display goes blank
input),
numeric input or initialization),
(e.g., counting),
soft key
isoTST
for further instructions
corresponding application
program for further instructions
for further instructions
69