Sartorius Factory Series FC06BBE-S Operating Instructions Manual page 54

Preparation
§ Turn on the scale: Press e/[ON/OFF]
> Sartorius logo is displayed, self-test is performed
§ Select the Animal weighing application in the Setup menu: Press M
§ Select the Application menu:
§ Select
Application 1
§ Select
Animal weigh.
§ Confirm
Animal weigh.
§ Select and confirm:
–
Animal activity
or
Calm
or
Normal
Active
– :
Start
or
Manual mode
Automatic mode
–
Decimal places in result display
or
None
1 decimal place
2 decimal places
3 decimal places
4 decimal places
5 decimal places
6 decimal places
– :
Printout
or
None
Average weight only
Average and calculated value
see also the "Application Menu (Overview)" in the chapter entitled
"Configuring the Scale"
§ Save settings and exit the Setup menu: Press M
54
soft key
App
: O soft key
: Q or q soft key repeatedly
: O soft key
:
or
or
or
or
or
or
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during
– printing,
you can also access the following
functions from this application:
– calibration (not during
– toggling to the next application
– setup,
– turning off the scale.
Calibration/Adjustment
:
§ Press the
> See "Calibration/Adjustment"
Toggling to the Next Application
§ Press D/[TOGGLE]
> See the section on the
Setup (setting parameters)
§ Press M
> See "Configuring the Scale"
Turning Off the Scale
§ Press e/[ON/OFF]
> The scale shuts off
> The display goes blank
alphanumeric input),
alphanumeric input),
(e.g., checkweighing),
soft key
isoTST
for further instructions
corresponding application
program for further instructions
for further instructions