Sartorius Factory Series FC06BBE-S Operating Instructions Manual page 50

Preparation
To calculate a value in percent, the reference percentage must be known. This
value can be entered into the weighing-in-percent program in one of three ways:
– The last reference percentage entered is loaded and displayed when
you turn on the scale. Place the corresponding weight on the scale and
initialize the weighing-in-percent program;
– With automatic initialization switched on, the scale goes into the
"weighing in percent" mode when you turn it on and loads the last refer-
ence percentage entered as well as the corresponding reference weight;
– Enter the reference weight using the numeric keys and store it
( soft key).
Wxx%
§ Turn on the scale: Press e/[ON/OFF]
> Sartorius logo is displayed, self-test is performed
§ Select the Weighing in percent application in the Setup menu: Press M
§ Select the Application menu:
§ Select
Application 1
§ Select
Percent weigh.
§ Confirm
Percent weigh.
§ Select and confirm:
–
Weight storage accuracy:
Display accuracy
+1 decimal place
+2 decimal places
–
Decimal places for readout in pct
or
None
1 decimal place
2 decimal places
3 decimal places
4 decimal places
5 decimal places
6 decimal places
see also the "Application Menu (Overview)" in the chapter entitled
"Configuring the Scale"
§ Save settings and exit the Setup menu: Press M
50
soft key
App
: O soft key
: Q or q soft key repeatedly
: O soft key
or
or
or
or
or
or
or
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during
– printing,
you can also access the following
functions from this application:
– calibration (not during
– toggling to the next application
– setup,
– turning off the scale.
Calibration/Adjustment
§ Press the
> See "Calibration/Adjustment"
Toggling to the Next Application
§ Press D/[TOGGLE]
> See the section on the
:
Setup (setting parameters)
§ Press M
> See "Configuring the Scale"
Turning Off the Scale
§ Press e/[ON/OFF]
> The scale shuts off
> The display goes blank
alphanumeric input),
alphanumeric input),
(e.g., checkweighing),
soft key
isoTST
for further instructions
corresponding application
program for further instructions
for further instructions