Sartorius Factory Series FC06BBE-S Operating Instructions Manual page 58

Preparation
§ Turn on the scale: Press e
> Sartorius logo is displayed, self-test is performed
§ Select the Calculation application program in the Setup menu: Press M
§ Select the Application menu:
§ Select
Application 1
§ Select
Calculation
§ Confirm
Calculation
§ Select and confirm:
–
Decimal places in calculated result
or
None
1 decimal place
2 decimal places
3 decimal places
4 decimal places
5 decimal places
6 decimal places
see also the "Application Menu (Overview)" in the chapter entitled
"Configuring the Scale"
§ Save settings and exit the Setup menu: Press M
58
soft key
App
: O soft key
: Q or q soft key repeatedly
: O soft key
or
or
or
or
or
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during
alphanumeric input),
– printing,
you can also access the following
functions from this application:
– calibration (not during
alphanumeric input),
:
– toggling to the next application
(e.g., checkweighing),
– setup,
– turning off the scale.
Calibration/Adjustment
§ Press the
> See "Calibration/Adjustment"
for further instructions
Toggling to the Next Application
§ Press D/[TOGGLE]
> See the section on the
corresponding application
program for further instructions
Setup (setting parameters)
§ Press M
> See "Configuring the Scale"
for further instructions
Turning Off the Scale
§ Press e/[ON/OFF]
> The scale shuts off
> The display goes blank
soft key
isoTST