Sartorius Factory Series FC06BBE-S Operating Instructions Manual page 82

Identification Codes
Purpose
With this function you can assign
identifiers to values for
documentation and printouts.
You can use this function in
combination with a program from
Application 1 (e.g., counting,
weighing in percent), one from
Application 2 (checkweighing, time-
controlled functions) and one from
Application 3 (totalizing, formulation,
statistics).
82
Available Features
– Store up to 4 identifiers
– Access 1 of the 4 identifiers
directly using the numeric keys
– Up to 20 characters per identifier
– You can assign this function to
the fourth or fifth soft key (from the
right), i.e. F4 or F5
– Press the soft key to display
ID
an identifier
– You can configure when
the identifier is included on the
printout (see "Preparation,"
this page)
– Press to delete
Delete
an identifier
– Optional configuration in the
Setup menu to delete a single
character of an identifier by
pressing c. Basic settings:
Keypad: CF function for input:
Delete last character
Preparation
§ Turn on the scale: Press e/[ON/OFF]
> Sartorius logo is displayed, self-test is performed
§ Select Extra function (F4) or Extra function (F5) in the Setup menu:
Press M
§ Select the Application menu:
§ Select
Extra func. (F4)
§ Select
Identification codes
§ Confirm
Identification codes
§ Select and confirm:
– :
Printout
Automatic, if configured
Once aft.pressing Print, if config.
Each time the print key is pressed
Once for M+ func. (app.3 memory)
see also the "Application Menu (Overview)" in the chapter entitled
"Configuring the Scale"
§ Save settings and exit the Setup menu: Press M
Factory Settings
Printout:
Each time the print
key is pressed
Soft Key Functions
Toggle to "Identification
ID
codes" menu
Delete input of selected
Delete
identifier
soft key
App
or
Extra func. (F5)
or
or
or