Sartorius Factory Series FC06BBE-S Operating Instructions Manual page 101

Interface Description
Purpose
Your Factory scale comes equipped
with an interface port for connection
to a computer or other peripheral
device.
You can use an on-line computer
to change, start and/or monitor the
functions of the scale and the
application programs. The interface
port also has four data output
port lines for the over/under check-
weighing program.
Available Features
Type of interface:
Operating mode:
Standard:
Transmission rates:
Parity:
Character format:
Handshake:
Operating mode:
Network address*:
Data output format of the scale:
* XBPI operating mode: 9,600 baud, 8 bits, odd parity, 1 stop bit
Network address is only valid in the XBPI mode
Factory Settings:
Transmission rate:
Parity:
Stop bits:
Handshake:
Operating mode:
Network address:
Print manually/automatically:
Stop automatic printing:
Automatic printout, time-dependent:
Tare after ind. printout:
Application initialization values:
Line format:
Preparation
§ See the chapter entitled "Overview" for the pin assignment chart
Operating the Scale
Serial interface
Full duplex
RS-232
150; 300; 600; 1,200; 2,400;
4,800; 9,600; 19,200 baud
Space, odd, even
1 start bit, 7-bit ASCII, parity,
1 or 2 stop bits
2-wire interface: via software
(XON/XOFF); 4-wire interface:
via hardware handshake lines
(CTS/DTR)
SBI, XBPI*
0, 1, 2, ..., 30, 31
16 or 22 characters
1,200 baud
[5-1-4]
Odd
[5-2-3]
1 stop bit
[5-3-1]
Hardware
[5-4-3]
1 character after CTS
SBI
[5-5-1]
0
[5-6-1]
Manual after stability
[6-1-2]
Not possible
[6-2-2]
After 1 display update
[6-3-1]
Off
[6-4-1]
Off
For other applications/GLP
(22 characters)
101