Practical Example 1:
Enter "Workstation 234" as scale ID; display and print other user data
Step
1. Select Setup:Input
Display workstation ID
(in this example: no ID assigned)
2. Before entering letters –
3. Select the letters group
4. Set the letter "M"
5. Enter the next letters of the –
scale ID
6. Set the letter "e"
7. Repeat steps 5 and 6 to enter
the required letters
8. Enter the numbers 234
If the last character entered
is a letter:
Conclude input of letters
9. Store scale ID
Key (or instruction)
Press M, then
the Input soft key
Press a
Press the STUVWX
soft key
Press the W soft key
Press the MNOPQR
soft key
Press the O soft key
Soft key ...
2 3 4
a
Press the l soft key
Configuring the Scale
Display/Output
15
Need help?
Do you have a question about the Factory Series FC06BBE-S and is the answer not in the manual?