Preparation
§ Turn on the scale: Press e
> Sartorius logo is displayed, self-test is performed
§ Select the Checkweighing application in the Setup menu: Press M
§ Select the Application menu:
§ Select
Application 2
§ Select
Checkweighing
§ Confirm
Checkweighing
§ Select and confirm:
–
Activation of port lines
Within checkweighing range
or
Always on
Stability and checkweighing range
or
At stability
Stability + checkwgh range -Oon
–
Type of checkweighing input
Target, minimum, maximum weight
Minimum, maximum weight
Target, minimum in %, maximum in %
–
Weight display mode
or
Absolute value
Difference from the target
–
Automatic printout of OK values
or
Yes
No
see also the "Application Menu (Overview)" in the chapter entitled
"Configuring the Scale"
§ Save settings and exit the Setup menu: Press M
62
soft key
App
: Press the q soft key and then theO soft key
: Q or q soft key repeatedly
: O soft key
:
or
or
:
or
or
:
:
Additional Functions
In addition to the functions for:
– alphanumeric input, (not during
initialization),
– taring (not during alphanumeric
input)
– printing,
you can also access the following
functions from this application:
– calibration (not during alpha-
numeric input or initialization),
– toggling to another application
(e.g., counting),
– setup, (not during initialization),
– turning off the scale.
Calibration/Adjustment
§ Press the
soft key
isoTST
> See "Calibration/Adjustment"
for further instructions
Toggling to Another Application
§ Press D/[TOGGLE]
> See the section on the
corresponding application
program for further instructions
Setup (setting parameters)
§ Press M
> See "Configuring the Scale"
for further instructions
Turning Off the Scale
§ Press e/[ON/OFF]
> The scale shuts off
> The display goes blank