Project Numbers - elmeg C46e Description And Installation

4.15

Project numbers

In some subprograms of the elmeg PABX the project number is also descri-
bed as the customer number.
A project is activated by entering a code and a subsequent project number (up
to 6 digits). The call connection data and charge rates are stored in a project
for output at the printer or the PC with the project number.
The project number can be entered for calls from external parties for existing
connection using a code. This also represents a method for generating a
complete data record for output at the printer or the PC.
4.15.1 Project number for a self-initiated external call
b
Lift up the receiver of your phone.
You will hear the internal dial tone.
*50
Dial this code *50.
t
Dial the project number (max. 6-digits).
#
End entry.
q
You will then hear the acknowledgement signal for about 1 se-
cond, followed by the special dial tone.
9
If you wish to call via any available external ISDN connection
dial 9 or *80.
or
*80
t
Dial the external number.
g
Conduct your call.
Note: You can also use this feature from an external enquiry call.
94
a/b-ISDN
a/b-ISDN