elmeg C46e Description And Installation page 81

t
Dial the number of the party you wish to call.
You hear the ringing signal .
*4
Dial the code.
q
You will then hear the acknowledgement signal, followed by the
busy signal.
a
Hang up your receiver.
If the party you called hangs up his/her receiver for the first time
after picking it up, your phone will be called.
l
Your telephone rings.
b
When you lift up the receiver of your phone the caller to whom
the call-back was addressed is also called. If he/she lifts up the
receiver, you can conduct your call as usual.
4.7.3 Deleting automatic call-back
Analog telephones delete all external and internal call-backs (subscriber not
busy and subscriber busy) using this procedure.
ISDN telephones delete automatic call-back (subscriber not busy) and the
reserved external ISDN connections using this procedure.
b
Lift up the receiver of your phone.
You will hear the internal dial tone.
#40
Dial the code.
q
Wait until you hear the acknowledgement signal,
and then you will hear the internal dial tone.
a
Hang up the receiver. This function is now canceled.
77
a/b-ISDN