Parking At The Internal Bus; Multifunctional Device - elmeg C46e Description And Installation

4.20 Parking at the internal bus

Parking is only possible within a bus (internal ISDN connection). During an
ongoing call, you wish to continue your call at a different inhouse location. After
activating the parking function at the terminal, you can disconnect your ISDN
terminal from the internal ISDN connection and take it with you to the other
location. When you re-establish your connection to the internal ISDN connec-
tion within three (3) minutes after disconnection and deactivate the parking
function, you can continue your previous call.
Please refer to the operating instructions for your ISDN terminal for the correct
operating sequences.

4.21 Multifunctional device

If an analog terminal connection of the PABX is configured with "multiport
functionality" for multifunctional devices, all calls are accepted regardless of
the selected service option. On seizing of the external ISDN connection using
a code, different service identifiers can be transmitted, regardless of how the
analog connection has been programmed. If you call the external ISDN
connection using *80, the service identifier "analog telephony" is transmit-
ted.
Example:
You can not reach a fax machine of group 3 that is operated with a service
identifier in a remote ISDN PABX. When you place a call using the code *773
your PABX transmits the service identifier Fax Group 3". The remote ISDN PABX
then recognizes the service option and connects you with the fax machine.
You wish to make an external connection with a certain service
option.
*773
You wish to send out a fax and also transmit the service identifier
"Fax Group 3".
or or
*774
You wish to transmit the service identifier "analog telephony".
or or
*772
You wish to transmit the service identifier "ISDN telephony".
or or
*771
You wish to transmit the service identifier "speech".
101
ISDN
a/b