Follow Me - elmeg C46e Description And Installation

4.14 Follow Me

4.14.1 Internal Follow Me
Using this function, calls can be rerouted to an inhouse telephone. This type of
call rerouting is configured at the subscriber to whom the call(s) is(are) to be
rerouted. If call rerouting has already been activated for this subscriber, this
must first be canceled before this new function can be configured.
b
Lift up the receiver of your phone.
You will hear the internal dial tone.
*64
Select this code.
t
Select the internal terminal extension (00.....99) that is to be
rerouted.
#
End entry.
q
You will hear the acknowledgement signal for about one (1) se-
cond, followed by the internal dial tone.
a
Hang up the receiver.
4.14.2 Canceling Follow Me
b
Lift up the receiver of your phone. You will hear the internal dial
tone.
#64
Select this code.
t
Select the internal terminal extension (00.....99) whose rerou-
ting you wish to cancel.
#
End entry.
q
You will hear the acknowledgement signal for about one (1) se-
cond, followed by the internal dial tone.
a
Hang up the receiver.
91
a/b-ISDN