elmeg C46e Description And Installation page 104

4.19 Calendar
You can configure two completely independent calendars in your PABX. It is
possible to switch automatically between a day and a night variant at a defined
time. A different day/night switchover time can be selected for each day of the
week. A calendar consists of date pairs which can be specifically assigned to
the individual days of the week.
All features which differentiate between a day and a night call mode in call
distribution (AVA, TFE, teams) can be used by these calendars, with each
calendar being allocated specifically to the active feature. An assigned calendar
replaces manual switchover between the day and night call modes for these
features. If the entry is the same for Night/Day and Day/Night, switchover is not
made; the calendar is configured during programming.
Example:
Day
Night
Monday 09:30 am
Friday 07:00 am
Saturday 09:00 am
Calendar 1
Day Day Night
08:15 pm
02:00 pm
12:00 am
100
a/b ISDN
Calendar 2
Night Day Day
08:00 am 06:00 pm
06:00 am 03:30 pm
09:00 am 12:00 am
Night