elmeg C46e Description And Installation page 68

4.2.6 External calls
You wish to establish an external connection with an external subscriber, or
with a subscriber with a multipoint connection.
b
Lift up the receiver of your phone. You will hear the internal dial
tone.
9
If you wish to call via any available external ISDN connection,
dial 9
or
or *80.
*80
For specific selection of an external ISDN connection:
*8
dial this code.
Select the external ISDN connection through which you wish
to call:
1
ISDN connection 1.
2
ISDN connection 2.
3
ISDN connection 3.
4
ISDN connection 4.
5
ISDN connection 5.
6
ISDN connection 6.
You will then hear the external dial tone.
If, after dialing 9 or *80 to *86 , you hear a busy signal,
either your telephone does not have the correct authorization,
or the external ISDN connection is busy.
t
Dial the number you wish to call.
You then hear the ringing tone.
The external subscriber is being called.
The called party lifts the receiver of his/her phone.
g
Conduct your external call.
a
End the call by hanging up your receiver.
64
a/b-ISDN