elmeg C46e Description And Installation page 69

4.2.7 Block calling (initializing call)
With the aid of block calling it is possible to first input the number completely
at the terminal and to store it temporarily in the PABX. Then, you can initiate
calling of the complete number to the exchange. With some network service
providers block calling is essential to permit specific direct dialing to a certain
terminal. This feature is described in the operating instructions for ISDN
terminals. Block calling is also possible for inhouse calling.
b
Lift up the receiver of your phone. You will hear the internal dial
tone.
*55
Dial the code.
9
If you wish to call via any available external ISDN connection,
dial 9
or
or *80.
*80
For specific selection of an external ISDN connection.
*8
Dial this code.
Select the external ISDN connection through which you wish to
call:
1
ISDN connection 1.
2
ISDN connection 2.
3
ISDN connection 3.
4
ISDN connection 4.
5
ISDN connection 5.
6
ISDN connection 6.
t
Dial the number you wish to call.
#
Begin your call by pressing the button #.
Only now is your call sent to the exchange.
You then hear the ringing tone.
The external subscriber is being called.
The called party lifts the receiver of his/her phone.
g
Conduct your external call.
65
a/b