•
the message has not been explicitly deactivated and
•
the function "don't disturb" has not been activated.
If the don't disturb function is activated at a system telephone, no messages
can be put through to this phone. You can also specifically inhibit or permit
messages using a function key or a code procedure.
Enable (permit) messages
b
Lift the headset of your system telephone.
You will hear the internal dial tone.
*591
Select this code.
q
You will hear the acknowledgement signal.
a
Replace the headset.
Your system telephone can now receive messages.
Inhibit messages
b
Lift the headset of your system telephone.
You will hear the internal dial tone.
#591
Select this code.
q
You will hear the acknowledgement signal.
a
Replace the headset.
No messages can be put through to your system telephone.
4.1.2
Simplex intercom
The intercom function allows you to set up a connection to another system
telephone without this connection having to be actively accepted. Intercom
calls are accepted automatically by the phone being called by activating the
"hands free calling" function when:
•
the telephone is idle,
•
the intercom function has not been explicitly deactivated and
•
the function "don't disturb" has been deactivated.
60
C/CS
CS100