elmeg C46e Description And Installation page 9

•
The activated terminals are authorized for international calls.
•
The number of the caller is displayed.
•
The B number is displayed for the caller.
•
Call waiting for a/b terminal has been configured.
•
Automatic seizure has not been configured.
•
The door intercom module has not been configured.
•
No entry has been made for the TFE switchable call mode.
•
No terminal has TFE authorization.
•
No speed dialing destinations have been entered.
•
Music on hold: You will hear internal music on hold melody 1.
•
Call control has not been configured.
•
The time is set as the date when the software version is deli-
vered.
•
The charge rate unit counter for calls is set to 0.
•
Printout of the call charge records is not activated.
•
Up to 2000 charge records can be stored for the terminals.
•
The numbers in the call records are shown in their entirety.
•
Call records for incoming connections are stored only when a
client number is allocated.
•
Analog charge forwarding is not activated.
•
Analog call number transmission is deactivated.
•
The keypad function for the external ISDN connection is not
enabled for any terminals.
•
Remote configuration can be initiated from any terminal.
•
Remote switching authorization (external follow me) is deacti-
vated.
•
The switchover times are entered as follows in the calendar
for all days of the week:
Switchover Night/Day: 8:00 AM
Switchover Day/Night: 4:00 PM
•
A calendar is not assigned to the switchable call modes, the
teams or TFE modes.
•
The internal service number is 59.
•
Internal numbers in the initial state
5