elmeg C46e Description And Installation page 70

a
End the call by hanging up your receiver.
4.2.8 Routing discrimination
This feature can only be used when there are two or more external ISDN
connections available. During programming of the PABX you can define which
external ISDN connection you seize from one or more set terminals. The makes
it possible, for example, to have the PABX used by two companies, or to keep
an "executive line" free.
Rate charging can then be specifically assigned to the "companies" and the
terminals. Routing discrimination can not be disabled by "specific seizure of an
external ISDN connection".
4.2.9 Automatic exchange line acquisition of
an external ISDN connection
The PABX allows individual users to automatically or manually activate the
seizure of an external ISDN connection using a defined procedure. When this
feature is activated, you are switched immediately to the external ISDN con-
nection after picking up your receiver; you will then hear the external dial tone.
You can then immediately begin your external call. If you wish to make an
inhouse call, lift up your receiver and press the button *; after this, you can
make an inhouse call. If you wish to make an inhouse call and hear the busy
signal after lifting your receiver (external ISDN connections are busy), first
deactivate the feature "automatic exchange .....", replace the receiver and lift
it up again. You will then hear the internal dial tone.
Activating automatic seizure
b
Lift up the receiver of your phone. You will hear the internal dial
tone.
*56
Dial the code.
q
You will then hear the acknowledgement signal.
a
replace the receiver; the feature has been activated.
66
a/b-ISDN
a/b-ISDN