elmeg C46e Description And Installation page 73

die Teamrufnummer, all assigned terminals are called. Teams are not configu-
red as a function of the service. The switchable call modes "Day" and "Night"
can be configured within each team. Call rerouting to an external subscriber is
also possible within each team. Teams can not be called during an enquiry call
or call forwarding.
4.4.1 Call at a busy team subscriber
(busy on busy)
When a member of a team is conducting a call you can decide whether further
calls for this team are to be signaled or not. If the function "busy on busy"
configured for this team, any further callers to this team will hear the busy signal.
4.4.2 Entering in/Deleting from a team (temporary)
First, permanently assign your number to one, several or all teams during
programming.
You can enter or delete yourself in the switchable call modes for a team, or for
all teams. If you are not entered, no team calls will be signaled. Entering and
deleting is effected simultaneously in the day/night modes. If all subscribers are
deleted, the external call will be put through to the terminals entered in the
current service-specific call modes.
Entering in a team
b
Lift up the headset of your telephone.
You will hear the internal dial tone.
*943
Select this code.
t
Dial the team number.
q
You will hear the acknowledgement signal.
a
Replace the headset.
69
a/b-ISDN
a/b-ISDN