Installation; Installation Of The Pabx - elmeg C46e Description And Installation

2

Installation

2.1

Installation of the PABX

Please check to ensure that all items are in the package before beginning
installation.
Contents:
•
1 PABX
•
1 ISDN connection cord
•
1 PC connection cable 9/9-pin (RS232)
•
1 Set of operating instructions
•
1 CD-ROM for setup programming under
Windows 3.1, Windows 95 and Windows NT
•
Bag with connector terminals
•
1 Drilling template
•
3 Dowels
•
3 screws
2.1.1 Installation location
Your PABX has been designed for operation at ambient temperatures above
0 and below +40 °C.
Therefore, we recommend that you avoid installing your PABX in the following
locations:
•
above or in front of sources of excessive heat, e.g. radiators
•
in places exposed to direct solar radiation
•
behind curtains
•
in small, non-ventilated rooms
•
in rooms with excessive humidity
•
on or near flammable
materials
•
in the vicinity of high-frequency devices, such as radio trans-
mitters, radiotherapy systems, etc.
The PABX is powered via a 230 V AC utility outlet. Please ensure that the
electrical outlet (grounding outlet) for the PABX (and for additional devices
13